ru
youtube
vk
ok
vk
vk
inst
Bryansk, Moskovsky Prospect 86, 8 (800) 770-70-80

GRAIN HARVESTING COMBINE "DESNA-PALESSE GS1218А-1"

Combine harvester GS1218A-1 is a further development of the popular grain harvester GS12 at a higher engineering level with improved design.

List of changes made to the design of the harvester GS1218A-1 compared to the harvester GS1218:

  • There was changed the construction of feed elevator, installed a dust extraction, also were used conveyor chains “IVIS” and installed 4-row belt drive. This way we increased reliability of technical process and guaranteed the comfort of machine operator (reduction of dust level in front of the grain header).
  • Grain bunker volume was extended to 9 m3, which increases an output per shift of the harvester.
  • A platform vibrator was installed in the grain bunker, that provides safety unloading of high humidity grain and elimination of arch formation.
  • Strengthened shaking board and suspension links increase reliability of technical process while harvesting wheat and corn of high humidity.
  • There were used side hybrid-plastic machine hoods.
  • There were some changes made in the cabin, so it became even more comfortable.
  • There were installed decorative plastic fence on straw walker hood.
  • There were changed headlamps, bumper and masks on a cab subframe.
  • As an option, with Mercedes engine can be used following components: multifunction jack “Faster” (connecting the grain header with thresher), hydrostatics “Sauer Danfoss” and other hydraulic components of worldwide known producers.
  • As an option, on the combine harvester it is possible to install the air filter of increased dust holding capacity "MANN-HUMMEL", Germany, to extend the time between maintenance.

Grain harvesting combine “DESNA-PALESSE GS1218A-1” conforms the best analogues of the world manufacturers with it`s operating process parameters. At the same time the working cost of harvesting is several-fold lower due to low purchase price and owning cost.

Engine+

  • Engine model
    ЯМЗ-238ДЕ-22
  • Nominal engine power, kW / h.p.
    243 /330

Thresher+

  • Frequency of threshing drum rotations, rpm
  • Separation
    three stage with blow of each stage
  • Separation area, not less than, m2
    6,15
  • Threshing drum diameter: first / second, mm
    600 / 800
  • Threshing drum width, mm
    1500
  • Total separation area of concave, not less than, m2
    2,39
  • Total sieve area, not less than, m2
    5,0

Grain tank+

  • Angle of unloading auger turning, not less than, degree
    101
  • Capturing width of header, m
    6,0; 7,0; 9,2
  • Capturing width of pick-up, m
    3,4
  • Control of unloading auger
    electro hydraulic control from operators seat
  • Fuel tank volume, l
    600
  • Grain tank type
    transformable, with automatic signaling of filling and forced unloading
  • Grain tank volume, not less than, m3
    9,0
  • Length of boom of unloading auger, not less than, mm
    3300
  • Loading height of unloading auger, not less than, mm
    4000
  • Productivity on grain harvesting in 1 hour, not less than, t/h
    18
  • Throughput on grain mass, not less than, kg/s
    12

Overall dimensions and weight +

  • Dimensions of standard set (self-propelled thresher, grain header with 7 meters capturing width) in operating position, up to: length / width / height, mm
    11200 / 7600 / 4650
  • Weight of standard set (without transport truck), kg
    16600

Options+

  • Devise for rapeseed harvesting. Capturing width, m
    6,0; 7,0
  • Frequency of separator fan rotation, rpm
    318-960
  • Header for soybean harvesting. Capturing width, m
    6,0; 7,0
  • Header for sunflower harvesting. Number of harvested rows, pcs
    8; 12
  • Kits with header for corn harvesting. Number of harvested rows, pcs
    6; 8
  • Road clearance, not less than, mm
    330